18 User’s Guide
7.0 TESTING & MAINTENANCE
With the system disarmed and the READY Light on,
activate motion detectors by walking in the protected
area. Open and close protected doors and verify that the
corresponding button illuminates. Do not use an open
flame or burning materials to test your fire detection
devices. Your installer can advise you of the best way to
test your particular system.
Under normal use, your system requires virtually no
maintenance other than regular testing. It is
recommended that the standby battery be changed
every three years. Speak to your installer about the
necessary tests and at what frequency they should be
performed.
To Next Page
Loading...
