14 User’s Guide
5.0 ADDITIONAL FEATURES
Keypad Chimes and Muting must be re-
programmed if your system suffers a total power
loss.
When you press and hold the button (as
described in section 5.1 and section 5.2) and the
keypad emits a Confirmation Beep, the Chime
feature has been enabled for that zone or Keypad
Muting has been enabled for that keypad. If the
keypad emits a Rejection Beep, these features
have been disabled.
5.1 PROGRAMMING CHIME ZONES
This feature allows you to program which zones will be
Chime Enabled. A Chime Enabled zone will advise you
every time it is opened by causing your keypad to emit a
rapid intermittent beep tone (BEEP-BEEP-BEEP-BEEP).
Press and hold any button from [1] to [6] for 3 seconds
to activate or deactivate Chiming for zones 1 to 6 (also
see note above). For example, press and hold the [1]
button to enable Chiming on zone 1.
To Next Page
Loading...
Need help?
General
