Spectra 1727 9
4.0 ARMING & DISARMING
Take full advantage of your Spectra 1727 system by
familiarizing yourself with all the arming methods.
4.1 EXIT DELAY
Before arming, the system starts the Exit Delay to give
you enough time to exit the protected area. The READY
Light will flash during the Exit Delay and the keypad may
beep.
4.2 DISARMING & DEACTIVATING AN ALARM
To disarm an armed system or an alarm, enter your
access code. An entry point, like the front door, will be
programmed with an Entry Delay. When an entry point is
opened, your alarm system will not generate an alarm
until the Entry Delay elapses or you disarm the system.
Any code can disarm the system except User Code 7
(Regular Arm Only).
How Do I Deactivate an Alarm?
Enter your [ACCESS CODE]
To Next Page
Loading...
Need help?
General
