10 User’s Guide
4.3 REGULAR ARMING
This method, commonly used for day-to-day arming, will
arm all the zones in the system.
When you have correctly armed the system, the Exit
Delay (see section 4.1) will start and the ARM Light will
turn on. Please note that you can Regular Arm by using
One-Touch Arming (see section 4.7).
4.4 STAY ARMING
This method allows you to remain in the protected area
while partially arming the system. Certain zones are
programmed as Stay Zones, which are bypassed when
Stay Arming. For example, when you go to sleep at
How Do I Disarm the System?
For a Stay Armed system, go to Step 2.
1) Enter through an entry point (i.e. front door).
2) Enter your [ACCESS CODE]
After the Confirmation Beep, the ARM Light will turn off.
How Do I Regular Arm?
1) Close all zones in the system.
2) Enter your [ACCESS CODE]
To Next Page
Loading...
Need help?
General
