4 User’s Guide
2.0 BASIC OPERATION
Both the Spectra 1686H and 1686V LED Keypads
function and display information the same way. The
following sections provide you with an introduction to the
buttons and indicator lights on your keypad.
The installer must enable many of the system’s
features. If the feature is not programmed, the
keypad will emit a Rejection Beep and the action
will be cancelled. Refer to System Checklist in
section 8.0 for details.
2.1 AUDITORY FEEDBACK
When you enter information on the keypad, it will guide
you with beep tones that communicate acceptance or
rejection of your entries:
Confirmation Beep: When an operation (i.e. arming/
disarming) is successfully entered or when the system
switches to a new status/mode, the keypad emits an
intermittent beep (BEEP-BEEP-BEEP-BEEP).
Rejection Beep: When the system reverts to previous
status or when an operation is incorrectly entered, the
keypad emits a continuous beep tone (BEEEEEEEEP).
To Next Page
Loading...
Need help?
General
