23
DTC 1000 Cone-Fire Quick Reference
Afteryoupressthekey(s)intheleftcolumn,themessagetotherightwillappear.IfafterpressingENTER,then1,only4horizontallines
appear, your controller does not have Cone-Fire.
NO DELAY FIRE, NO ALARM. IF ALARM SOUNDS DURING FIRING, PRESS ENTER.
KEYS TO PRESS DISPLAY
Apply power to kiln ErrP
ENTER IdLE
ENTER ----
1 ConE
Cone # of choice 05 Displays cone #
ENTER SPd
1 (Fast), 2 (Med.), or 3 (Slow) FASt Med or SLO
ENTER HLd
Hold time (if any) 00.00 (or hold time)
ENTER CPL IdLE and flashing temperature
ENTER ----
ENTER -On-
Kiln is now firing to the cone you selected.
To Next Page
Loading...