Programming:
STEP KEY DESCRIPTION
1. RESET Clears control’s memory. Control is finished initializing when # stops
flashing (about 6 seconds).
2. NEXT Display shows MAINtAin (maintained relay operation).
3. + Toggle to MOMNtARY (momentary relay operation).
4. PROGRAM Display shows TIME header.
5. NEXT,+,- Use these keys to set time, date and Daylight Savings Time information.
6. PROGRAM Press PROGRAM key to step through headers until ASTR (astro
header) is reached.
7. NEXT Sunrise time is displayed with hours flashing.
8. +/- Set to today’s sunrise hour.
9. NEXT Sunrise minutes are flashing.
10. +/- Set to today’s sunrise minutes.
11. NEXT Sunset time is displayed with hours flashing.
12. +/- Set to today’s sunset hour.
44
To Next Page
Loading...