Sensor Events
Sensor Events header. Up to 32 sensor events can be pro-
grammed. A sensor event can be assigned to any channel. Each
sensor event can be assigned to any day or combination of
days including the 3 holiday schedules (A, B and C). Use the
NEXT key to begin programming.
The +/- keys will quickly step through the sensor events when
the event # is flashing. Select the sensor number, select the
channel and program the hours and minutes while each of these
parameters are flashing. When a sensor number is shown, its
sensor type (F,C,L or U) is also shown. If the input is not config-
ured as a sensor a question mark (?) is shown.
Select YES for each day that is to be included in this sensor
event.
Program the turn on setpoint.
28
To Next Page
Loading...