This screen is used for setting the on time when the input is
configured as an OVr (toggle) override type. The on time is pro-
grammable from 0 seconds to 23 hours, 59 minutes and 59 sec-
onds. When this on time is set to 0:00.00, the override functions
as a toggle on/toggle off override. When a non-zero value is
programmed, the override functions as a timed on/toggle off
override.
This screen is used for assigning channels to the inputs. This
applies only to the On\d, OVr and ENb input types.
This screen is used for calibrating the sensors.
The following calibration options are provided:
F: -12,-11,-9,-8,-6,-5,-3,-2,0,2,3,5,6,8,9,11
C: -8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7
L: -4,-3,-2,-1,0,1,2,3
U: -8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7
27
To Next Page
Loading...