Events
Events header. Up to 128 events can be programmed. Events can
be an ON, an OFF, dUR1(duration), dUR2, dUR3, dUR4, CYC1
(duty cycle), CYC2, CYC3 or CYC4. An event can be assigned to
any channel. Each event can be assigned to any day or combina-
tion of days including the 3 holiday schedules (A, B and C). Use
the NEXT key to begin programming.
The +/- keys will quickly step through the events when the event #
is flashing. Select the event type, select the channel and program
the hours and minutes while each of these parameters are flash-
ing, using the +/- key.
Select YES for each day that is to be included in this event.
25
To Next Page
Loading...