Set Time
Set Time header. This mode is used for setting time, date and
daylight savings time. Use the NEXT key to begin programming.
Program hours, minutes, seconds and day of week using the +/-
key. A PM indicator is used in the 12 hour format. AM begins with
midnight and PM begins with noon. NOTE: Only the PM indicator
will appear in the 12 hr format.
Program month, date and year.
To disable Daylight Savings Time operation, select NO.
Program the day that Daylight Savings Time begins. The control
defaults to the first Sunday in April. At 2:00 AM on this day, the
control’s time will advance one hour.
18
To Next Page
Loading...