EasyManua.ls Logo

Paramina MISTRAL M6-EM - Safety Regulations

Default Icon
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual -
Mistral M6&M8 -
06-2015 edition
.
PARAMINA SA Byway Evaggelistrias str. 19300 Aspropirgos, Greece, Tel: 0030 210 5575860-1
Fax: 0030 210 5575868, email: service@paramina.gr - website: www.paramina-compressors.com
7
Special attention
Do not use the compressor in explosive environment.
Connect the compressor only to electrical systems that are compatible with its electrical characteristics
and that are with in it’s rated capacity
Comply with the local mains supply company regulations.
Use only the recommended fuses.
A trained electrician may only execute maintenance in the electrical system.
During any maintenance work in the unit, turn off the power from the mains. It is also recommended
posting a notice warning about maintenance works on the compressor.
In case of having to execute maintenance works on an operating unit, a second person beside the
electrician must be present to handle the main safety switch. Tools to be used must be isolated.
Regularly check hoses, couplings and fittings for leaks and loose connections.
Regularly check tightening of the electrical connections.
If you replace mains cable, you must use the same type.
Decompress all hoses, filters, pressure tanks and, basically, the entire unit, before you carry out any
work.
Never exceed the allowed operating pressure of the cylinders.
Immediately replace cylinders with any kind of damage.
Do not heat the cylinders or any of their parts, because pressure will rise.
For loading lifting of the unit or heavy parts of it, lift from the handle on the one side and form the
base of the compressor on the other side or use the proper lift truck that is handled by trained stuff.
Never lift from the base of the motor or the motor itself.
Make sure you have properly secured the unit during its elevation or transport.
The unit must be unplugged from mains supply even during small movements. After you move it, plug it
again according to regulations and turn it on, following the directions described in this manual.
The compressor is not made for use by the sea. In such a case, spray the unit with anticorrosive
material. It (if used on a boat/ship) must be stored under the deck after use.
Safety Regulations
The PARAMINA Mistral compressor is a high pressure air-compressor and it is made according to EU
directive 2006/42/EC for the safety of machinery. Noise complies with 2000/14 EC directive.
The manufacturer follows all regulations above and declares that the unit is manufactured accordingly.
Following the safety regulations, an authorized professional in site must supervise compressors that will
be used as filling stations before starting their operation.

Related product manuals