EasyManua.ls Logo

PARAMOUNT BED CA-53380 - Bed Assembly Procedures

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
The boards can be attached or detatched.
When washing the patient's hair, detach the headboard. When performing lower limb training
or giving a foot bath, detach the footboard.
When attaching the board, make sure that the board stoppers are properly locked. Otherwise, the
board may disengage when the bed is moved, resulting in injury due to a fall.
Do not attach the board to a hole other than the board attachment hole. Attachment could
become insufficient and the board could be rattled or come off, resulting in injury.
When removing the board, do not forcefully lift it while the board is tilted. There is a risk of
deformation of the board insertion parts.
[Attaching]
Loosen the board stoppers on the bed.
Hold the grip of the board to lift it and properly
insert the board insertion part into the board
attachment hole of the bed.
Firmly tighten the board stopper to fasten the board.
Lightly pull up the board and check that the board is
locked.
[Detaching]
Loosen the board stoppers on the bed.
Hold the grip of the board and pull it directly up.
1.Board
Grip
Board insertion part
Board attachment hole
ASSEMBLING THE BED
4
Do not attach the board in the wrong way, or the head
or neck enters the gap between the board and the
side-rail, and there is a risk of injury.
Do not leave the board detached, or a patient may
fall off the bed, resulting in injury.
Do not detach the headboard when lifting pole is
attached, or the head or neck enters the gap between
the side-rail and the lifting pole, and there is a risk of
injury.
Headboard
(Footboard)
Tighten Loosen
Board stopper

Table of Contents

Related product manuals