Parker Compumotor - Spe

SPECIFICATIONS L£-Series Operato~', Manual
SPECIFICATIONS
Physical Deser1pt1o~
LE-Drive height:
LE-Drive length:
LE-Drive width:
4.75 inches (12.00 em)
12.00 inches (30.50 cm)
8.00 inches (20.30 em)
LE-Drive weight: 10 lbs (11.5 kg) without motor
14 lbs (6.4 kg) without motor. with shipping container
Enviromaent41
Operating temperature: 320F to I22
0
F (OOC to 50°C) when
passively cooled. The heatsink should never exceed 149°F (65°C).
Humidity: 0-95%. non-condensing.
Electrical
Input power:
Vol
tage: ·102-125 VAC, single phase
or 210-250 VAC. single phase. See Appendix D
Frequency: 47-66 Hz.
Current: 1 amp maximum continuous
Output power: (to motor)
Voltage: +/- 20 DC
COTllpumotor
Current: 0.125 amp to 2.0 amps per phase in 0.125 amp
increments.
p. 11
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com