To Next PageTo Next Page
Need help?Do you have a question about the Parker 590+ series and is the answer not in the manual?
General| Control Mode | Speed, Torque, Position |
|---|---|
| Operating Temperature | 0°C to 40°C |
| Altitude | Up to 1000 m without derating |
| Speed Regulation | 0.01% of base speed |
| Communication Options | Ethernet, Profibus, CANbus, Modbus, DeviceNet |
| Feedback Options | Tachometer, Encoder |
| Protection Rating | IP20 |
| Storage Temperature | -25°C to 55°C |
| Relative Humidity | 5% to 95% (non-condensing) |
General overview of the DC590+ series drive and its features.
Crucial safety guidelines and warnings for installation and operation of the drive.
Guidance on initial steps after receiving the DC590+ drive.
Introduction to the DC590+ series products and their capabilities.
Detailed instructions for the physical and electrical installation of the drive.
Instructions for operating the drive, including setup and basic functions.
Explanation of the drive's control loop principles.
Information on using the 6911 Keypad for drive control and programming.
Guidance on identifying and resolving drive trips and faults.
Procedures for maintaining and repairing the drive unit.
Details on drive communication protocols and system port usage.
Regulatory compliance information for the drive.
Comprehensive tables detailing all drive parameters.
Introduction to drive programming using function blocks and DSE Lite.
Reference for technical data and specifications.
