3-68 Installing the Drive
DC590+ Series DC Digital Drive
Mounting the Phase Assemblies
The three phase assemblies are mounted
vertically onto a solid, flat, vertical backplate
inside the cubicle, with the fans at the bottom.
Temporary Hanging: A temporary
hanging point is provided to hang the
unit on before securing the phase
assembly to the backplate at the four
corners.
A B C D E F
24 (0.94) 23 (0.91) 72 (2.83) 144 (5.67) 247.5 (9.74) 319.5 (12.58)
G H J K L M
391.5 (15.41) 495 (19.49) 567 (22.32) 639 (25.16) 732 (28.82) 35.5 (1.40)
N P Q
35 (1.38) 678 (26.69) 712 (28.03)
Dimensions are in millimetres (inches)
To Next Page
Loading...
