Cont. 3
Requirements
IMPORTANT
Please read this information BEFORE installing the equipment.
Intended Users
This manual is to be made available to all persons who are required to install, configure or service equipment described
herein, or any other associated operation.
The information given is intended to highlight safety issues, and to enable the user to obtain maximum benefit from the
equipment.
Complete the following table for future reference detailing how the unit is to be installed and used.
Model Number
(see product label)
Where installed
(for your own information)
(refer to "Certification")
ο Component ο Relevant Apparatus
Unit fitted:
; Enclosure
Application Area
The equipment described is intended for industrial (non-consumer) motor speed control utilising DC motors.
Personnel
Installation, operation and maintenance of the equipment should be carried out by qualified personnel. A qualified person is
someone who is technically competent and familiar with all safety information and established safety practices; with the
installation process, operation and maintenance of this equipment; and with all the hazards involved.
To Next Page
Loading...
Need help?
General
