D-54 Programming
DC590+ Series DC Digital Drive
DIGITAL
OUTPUTS
These function block allows
you to output digital
parameters within the
software to other
equipment.
A digital output can be
configured to point to any
digital value within the
software system and to
output information
depending upon the status of
that value.
DIGITAL OUTPUTS
.xx %
The unprocessed value to output.
INVERTED 359, 360, 361 FALSE / TRUE
Selects to invert the output when TRUE.
THRESHOLD 195, 196, 197 -300.00 to 300.00 %
(THRESHOLD (>))
The threshold which the input value must exceed to set the output to TRUE.
MODULUS 43, 44, 45 FALSE / TRUE
When TRUE, the absolute value of INPUT is used for the threshold test.
DIGOUT 1 (B5) to DIGOUT 3 (B7) 74, 75, 76 OFF / ON
The actual Boolean value sent to the output terminal.
To Next Page
Loading...
