Parker 590+ series - Filtering; AC Line Choke and Capacitors Fitted to Frame 1 - Diagram

3-8 Installing the Drive
DC590+ Series DC Digital Drive
Filtering
NOTE Refer to Appendix B: "Certification" - EMC.
For compliance in Europe with EN61800-3 Table 11:
• The CE marking of drives whose armature current >100A is applicable without filtering.
• The CE marking of drives whose armature current <100A is only applicable with filtering. The drive requires one of the following:
1. The specified filter given in Appendix B
(also refer to
34HExternal AC Supply EMC Filter Installation, page 35H3-60)
2. Compliant filtering offered by the System
3. Capacitors fitted between phase and earth (see
36HFigure 3- 4 below)
St art
Contactor
AC
Line
Choke
Drive
C4
C1, C2 & C3
Su ita bl e Branch
Protection Fuse
or
Circuit Breaker
PE
(must be
fitted)
590AC Line Choke Filter
CO468398
Capacitor Reference Number Capacitor Value/Type
C1, C2, C3
3.0F 400V, EMI suppressor type Class X1
C4
1.0F 400V, EMI suppressor type Class X1
Figure 3- 4 AC Line Choke and Capacitors fitted to Frame 1 (15A & 35A) & Frame 2 (40A & 70A) Drives