Parker 590+ series - Optional Equipment; Remote Mounting the Keypad

Installing the Drive 3-53
DC590+ Series DC Digital Drive
Optional Equipment
Contact your local Parker SSD Drives office to order optional equipment.
Item Part Number
590 Digital Section Control
A Parker SSD Drives application manual detailing the use of the block diagram
to implement open and closed loop control of driven web section rolls
HA467078U001
DSELite
Parker SSD Drives’ Windows-based block programming software
Go to www.parker.com
External AC Supply (RFI) Filter
For Drives without internal filters, on cable runs in excess of 25 metres
Refer to Appendix E:
“External AC Supply (RFI)
Filters” for Part Numbers
Microtach Option Board
Two board types for connecting to a plastic or glass fiber Microtach encoder
• Glass
• Plastic
AH386025U001
AH386025U002
Encoder Option Board
A board to interface to a wire-ended encoder AH387775U001 (universal)
Tacho Calibration Option Board
A switchable calibration board for interfacing to AC/DC analog
tachogenerators
AH385870U001
Comms Option Board (P1) Board
Two board types for supporting EI BYSYNCH or PROFIBUS communication
protocols for connection to other equipment.
• EI BYSYNCH (RS422, RS485)
• PROFIBUS
• LINK
6055/EI00/00
6055/PROF/00
6055/LINK/00
Remote Mounting the Keypad
The 6052 Mounting Kit is required to remote-mount a 6901 or 6911 Keypad. An enclosure rating of IP54 is achieved for the remote Keypad when
correctly mounted using the 6052 Mounting Kit.