D-6 Programming
DC590+ Series DC Digital Drive
Function Blocks By Category
The function blocks described in this Appendix are arranged in alphabetical order, however, they are listed below by
Category. They each appear as a Menu in the FUNCTION BLOCKS menu. To view the FUNCTION BLOCKS Menu,
ADVANCED view level must be selected
Alarms
ALARM HISTORY D-17 ALARMS D-18
Communications
5703 IN D-12 COMMS PORT D-32 TEC OPTION D-133
5705 OUT D-13 miniLINK D-85
Inputs & Outputs
ANALOG INPUTS D-22 AUX I/O D-28 DIGITAL OUTPUTS D-54
ANALOG OUTPUTS D-24 DIGITAL INPUTS D-51
Menus
MENUS D-83 OP STATION D-87
Miscellaneous
ADVANCED D-14 DRIVE INFO D-57 MULTIPLEXER D-86
CONFIGURE DRIVE D-34 LINKS D-72 VALUE FUNC D-136
DEMULITPLEXER D-42 LOGIC FUNC D-77
Motor Control
AUTOTUNE D-25 ENCODER D-59 INVERSE TIME D-73
CALIBRATION D-29 FEEDBACKS D-62 PLL D-94
CURRENT LOOP D-35 FIELD CONTROL D-64 SPEED LOOP D-117
CURRENT PROFILE D-40 INERTIA COMP D-71
Seq & Ref
JOG/SLACK D-74 SEQUENCING D-111 STOP RATES D-130
RAMPS D-104 STANDSTILL D-127
Setpoint Funcs
DEADBAND D-41 PRESET SPEEDS D-96 SETPOINT SUM D-114
MIN SPEED D-84 RAISE/LOWER D-101 SRAMP D-124
PID D-89 SELECT D-110
Winder
DIAMETER CALC D-43 PROFILED GAIN D-99 TORQUE CALC D-135
To Next Page
Loading...
