Parker 590+ series - Password; To Activate Password Protection; To Deactivate Password Protection

6-16 The Keypad
DC590+ Series DC Digital Drive
PASSWORD
When in force, the password prevents unauthorised parameter modification by making all parameters “read-only”. If you
attempt to modify a password protected parameter, it will cause “PASSWORD ??” to flash on the display.
The password protection is activated/deactivated using the ENTER PASSWORD and CHANGE PASSWORD parameters:
Activated: ENTER PASSWORD and CHANGE PASSWORD values are different
Deactivated: ENTER PASSWORD and CHANGE PASSWORD values are the same
To Activate Password Protection To Deactivate Password Protection
By default, the password feature is
disabled, i.e. both the
CHANGE PASSWORD and
ENTER PASSWORD parameters
have the same value: 0x0000.
To activate a password:
Enter any value other than the
default value (0x0000) in the
CHANGE PASSWORD
parameter, for example 0x0002.
The ENTER PASSWORD
parameter will now display this
new password
(e.g. 0x0002). Change the value in
this parameter (to hide the
password).
The password is now hidden, and
CHANGE PASSWORD displays
"
****
".
MENU LEVEL
PAS SWORD
PAS SWORD
PAS SWORD
0X0000
0X0002
PAS SWORD
PAS SWORD
M
M
E
0X0002
0X0000
PASSWORD
MENU LEVEL
PAS SWORD
M
E
E
ENTER PASSWORD
CHANGE PASSWORD
CHANGE PASSWORD
CHANGE PASSWORD
CHANGE PASSWORD
ENTER PASSWORD
ENTER PASSWORD
ENTER PASSWORD
ENTER PASSWORD
With password protection
activated, you can no longer edit
the CHANGE PASSWORD
parameter until you deactivate the
password protection (because the
value is hidden by “
****
”).
To deactivate a password:
Enter the current password
(e.g. 0x0002) in the ENTER
PASSWORD parameter.
CHANGE PASSWORD will now
display the current password.
Because the ENTER PASSWORD
parameter value is always reset to
0x0000 when powering-up the
drive, 0x0000 is the default value
for the CHANGE PASSWORD
parameter, i.e. by default, the two
parameter values are the same and
so password protection is disabled.
MENU LEVEL
ENTER PASSWORD
PAS SWORD
ENTER PASSWORD
ENTER PASSWORD
0X0000
ENTER PASSWORD
0X0002
PAS SWORD
ENTER PASSWORD
MENU LEVEL
PAS SWORD
M
E
E
M
MMI Menu Ma
p
1
PASSWORD
ENTER PASSWORD
CHANGE PASSWORD