8-2 Routine Maintenance and Repair
DC590+ Series DC Digital Drive
Repair
There are no user-serviceable components. This section contains information for repair work that may be undertaken.
Saving Your Application Data
The Drive retains saved settings during power-down. You can download and upload this back into the repaired unit, if necessary. You may, depending
upon your knowledge of the fault, attempt the back-up of your application data now, refer to Chapter 6: “The Keypad” - Copying an Application.
If the fault clearly lies within the MMI, then return the unit for repair.
Returning the Unit to Parker SSD Drives
Before calling Parker SSD Drives Customer Service, make sure you have the following information available:
Information Source
Model number and serial number DC590+Digital drive rating label
Motor horsepower, armature current and voltage, field current and voltage, base and top
speed ratings
Motor nameplate
Speed voltage feedback per 1000 RPM (analog device), or counts per revolution(digital device) Speed feedback device nameplate
Applications information and operating environment System drawings.
Contact your nearest Parker SSD Drives Service Centre to arrange return of the item.
You will be given a Returned Material Authorisation. Use this as a reference on all paperwork you return with the faulty item.
Pack and despatch the item in the original packing materials; or at least an anti-static enclosure. Do not allow packaging chips to enter the unit.
Warranty Information
Warranty information precedes the Contents at the front of this manual.
To Next Page
Loading...
