Parker 590+ series - External Reset

Programming D-109
DC590+ Series DC Digital Drive
EXTERNAL RESET
RAMP INPUT X%
EXTERNAL RESET ENABLED
0%
t
X%
RAMP INPUT %
100%
= RAMP I/P X%
0%
t
Y%
t
RAMP OUPUT %
100%
X%
The ramp input is set to X% at time t
0
. The ramp output will increase at the ramp rate.
While EXTERNAL RESET is ENABLED, the ramp output resets to RESET VALUE (Y%). When EXTERNAL RESET is DISABLED, the ramp
output continues to follow the input signal.