Cont. 6
CAUTION!
APPLICATION RISK
• The specifications, processes and circuitry described herein are for guidance only and may need to be adapted to the user’s specific
application. We can not guarantee the suitability of the equipment described in this Manual for individual applications.
• It is advised that motors with significantly lower voltage ratings than the supply voltage are NOT used with the drive.
RISK ASSESSMENT
Under fault conditions, power loss or unintended operating conditions, the drive may not operate as intended. In particular:
• Stored energy might not discharge to safe levels as quickly as
suggested, and can still be present even though the drive appears
to be switched off
• The motor's direction of rotation might not be controlled
• The motor speed might not be controlled
• The motor might be energised
A drive is a component within a drive system that may influence its operation or effects under a fault condition. Consideration must be given to:
• Stored energy • Supply disconnects • Sequencing logic • Unintended operation
To Next Page
Loading...
Need help?
General
