A-4 Serial Communications
DC590+ Series DC Digital Drive
DSELite Support
This is Parker’s Windows-based block programming software. It has a graphical user interface and drawing tools to allow you to create block
programming diagrams quickly and easily. Go to www.Parker.com/ssd for updates.
System Port (P3) Set-up
Set MODE parameter (Tag No. 130) to EIASCII using the MMI
Set the BAUD RATE parameter to match the baud rate selected on the host computer.
1 Stop bit (fixed)
Even Parity (fixed)
7 bits (fixed)
No flow control, (fixed)
To Next Page
Loading...
