DB Series Nitrogen Generator DB5-20 Model
SAFETY INFORMATION
Do not operate this equipment until the safety infor-
mation and instructions in this user guide have been
read and understood by all personnel concerned.
USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR
IMPROPER USE OF THE PRODUCTS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
PERSONAL INJURY AND PROPERTY DAMAGE.
This document, and other information from
Parker Hannifin Corporation, its subsidiaries or
authorized distributors, provide product or system
options for further investigation by users having
technical expertise.
The user, through its own analysis and testing,
is solely responsible for making the final selection
of the system and components and assuring that
all performance, endurance, maintenance, safety
and warning requirements of the application are
met. The user must analyze all aspects of the
application, follow applicable industry standards,
and follow the information concerning the product
in the current product catalogue and in any other
materials provided from Parker.
To the extent that Parker, its subsidiaries or autho-
rized distributors provide component or system
options based upon data or specifications provided
by the user, the user is responsible for determining
that such data and specifications are suitable and
sufficient for all applications and reasonably fore-
seeable uses of the components or systems.
This equipment is intended to be operated indoors
and is designed to produce high purity nitrogen
gas from a supply of clean dry compressed air.
Please refer to the technical specification
for pressure, temperature, and compressed
air requirements.
Only competent personnel trained, qualified,
and approved by Parker Hannifin should perform
installation, commissioning, service and
repair procedures.
Use of the equipment in a manner not specified
within this user guide may result in an unplanned
release of pressure, which may cause serious
personal injury or damage.
When handling, installing or operating this
equipment, personnel must employ safe engineer-
ing practices and observe all related regulations,
health & safety procedures, and legal requirements
for safety.
Ensure that the equipment is depressurized and
electrically isolated, prior to carrying out any of
the scheduled maintenance instructions specified
within this user guide.
Note: Any interference with the calibration warning
labels will invalidate the gas generator’s warranty
and may incur costs for the re-calibration of the
gas generator.
Parker Hannifin cannot anticipate every possible
circumstance which may represent a potential haz-
ard. The warnings in this manual cover the most
known potential hazards, but by definition cannot
be all-inclusive. If the user employs an operating
procedure, item of equipment or a method of
working which is not specifically recommended
by Parker Hannifin the user must ensure that
the equipment will not be damaged or become
hazardous to persons or property.
Most accidents that occur during the operation
and maintenance of machinery are the result of
failure to observe basic safety rules and proce-
dures. Accidents can be avoided by recognizing
that any machinery is potentially hazardous.
Should you require any technical support or
training on this equipment, or any other equipment
within the Parker Hannifin range, please contact
Parker Hannifin Corporation.
Factory Contact Information:
Phone: (800) 343-4048
For pricing, availability, and purchase orders:
IGFGorders@parker.com
For technical support and aftermarket:
GSFsupport@parker.com
For product applications and technical sales:
FAFQuotes@parker.com
iii
To Next Page
Loading...
