Parker H Series - H Series Outside Screw & Yoke Head Maintenance

If your RSLogic 5000 is Version 13.X:
 •Highlightthe1738-AENT under I/O configuration, right click and
select NewModule.
 •ChoosetheGeneric 1738 module from the list of Allen-Bradley
modules.
 •Enter a name (optional), an appropriate slot number and the
connection parameters as shown in this screen capture.
 •ChooseNext to set RPI.
 •ChooseFinish. Notice that the 32 Point Valve Driver Module is
now under the I/O configuration.
Step5: AccessModuleDataviathePSSCENAor1738-AENT
Adapter and Create Ladder Program.
 •Makesurethe32outputsofPSSV32AappearinControllerTags.
Use the information in the ladder logic program to access module
data.
 •Referencepages4-13through4-14ofRockwellpublication
1734-UM011 for similar information.
Step6: DownloadtheProgramtotheController
 •Referencepages4-13through4-14ofRockwellpublication
1734-UM011 for similar information.
H Series Fieldbus 32 Point Valve Driver, Series A (PSSV32A) E100P
6
Setupthe32PointValveDriverinProbus
Step1: CongureValveDriverModuleinSSTProbus
 CongurationUtility
Note: SST-PFB-CLX is used here for example.  For different
Probusscanners,refertoappropriatedocumentationforsetup
information.
 •DownloadGSDlefromwww.parker.com/pneu/hserieseldbus
• InSSTProbusCongurationUtility,followLibrary➔Add GSD
to load the GSD file to SST Profibus.
 •InSSTProbusCongurationUtility,followBrowse➔Searchfor
devices to load the GSD file to SST Profibus
 •Rightclickonthefound device,follow GSD les and click on
appropriate GSD for PSSV32A.
 •AddPSSV32AasslavetoSST-PFB-CLXmaster.
 •
Detailed information can be found in the SST-PFB-CLX User Guide
(Ver. 1.4 715-0022), which is available on www.woodhead.com.
Step2: AddSSTProbusScannerinRSLogix5000
 I/OConguration
 •
Add SST-PFB-CLX scanner I/O configuration. Reference pages 36
to 39 of the SST-PFB-CLX User Guide, for detailed information.
 •Notice that the SST-PFB-CLX scanner is now under the I/O
configuration.
Step3: AccessModuleDataviatheSST-PFB-CLXScanner
and Create Ladder Program.
 •Reference Chapter 7 of the SST-PFB-CLX User Guide for
addressing information.