Parker PQDXXA-Z10 - Page 44

For additional information, spare parts or service requirements please contact:
Parker Hannifin Manufacturing Germany GmbH & Co KG HY30-3255-INST/UK
Pump and Motor Division Europe
Neefestraße 96
09116 Chemnitz, Germany
Tel: +49 (0)371 - 3937 - 0 © Copyright 2017
Fax: +49 (0)371 - 3937 - 488 All rights reserved
Email: pmde-pqd-support@parker.com
parker.com/pmde
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY
DAMAGE.
ThisdocumentandotherinformationfromParker-HanninCorporation,itssubsidiariesand
authorized distributors provide product or system options for further investigation by users having
technical expertise.
Theuser,throughitsownanalysisandtesting,issolelyresponsibleformakingthenalselection
of the system and components and assuring that all performance, endurance, maintenance,
safety and warning requirements of the application are met. The user must analyze all aspects
of the application, follow applicable industry standards, and follow the information concerning the
product in the current product catalogue and in any other materials provided from Parker or its
subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or
systemoptionsbasedupondataorspecicationsprovidedbytheuser,theuserisresponsiblefor
determiningthatsuchdataandspecicationsaresuitableandsufcientforallapplicationsand
reasonably foreseeable uses of the components or systems.
Offer of Sale
Please contact your Parker representation for a detailed ”Offer of Sale”.
WARNING – USER RESPONSIBILITY
Position notification regarding Machinery Directive 2006/42/EC:
ProductsmadebythePump&MotorDivisionEurope(PMDE)ofParkerHanninare
excluded from the scope of the machinery directive following the “Cetop” Position Paper on
the implementation of the Machinery Directive 2006/42/EC in the Fluid Power Industry.
All PMDE products are designed and manufactured considering the basic as well as the
proven safety principles according to:
 • ISO13849-1:2015
 • SS-ENISO4413:2010
so that the machines in which the products are incorporated meet the essential health and
safety requirements.
Conrmationsforcomponentstobeprovencomponent,e.g.forvalidationofhydraulic
systems,canonlybeprovidedafterananalysisofthespecicapplication,asthefacttobe
aprovencomponentmainlydependsonthespecicapplication.
Dr. Hans Haas
General Manger
Pump&MotorDivisionEurope