Parker SciLog LabTec - Page 55

55
5.2 Setup: Clock


- SETUP - CLOCK
UP DOWN SELECT

SELECT
DAY OF MONTH: 12
INCR DECR SELECT
CLOCK: Is used to set the Date and Time in the LabTec™ real time clock, and control the displayed
and output time format.
TIME OF DAY: Press Select and use the Incr. and Decr. buttons to set the current time in 24 hour
format. This should be preset by the factory prior to shipping.
PRINT ENABLE: Controls displayed and output time. Choose between Time of Day and Relative Time.
Time of Day yields current time, and Relative Time starts at 00:00:00 at the beginning of a processing
run. Default = Time of Day.
YEAR: Press Select and use Incr. and Decr. to set the current year.
DAY OF MONTH: Press Select and use Incr. and Decr. to set the current day of the month.
MONTH: Press Select and use Incr. and Decr. to set the current month.
- CLOCK - TIME OF DAY
UP DOWN SELECT
SELECT


DOWN
TIME:

12:00
INCR DECR SELECT
- CLOCK - PRINT ENABLE
UP DOWN SELECT
SELECT


DOWN
PRINT: TIME OF DAY
INCR DECR SELECT
- CLOCK - YEAR
UP DOWN SELECT
SELECT


DOWN
YEAR:

2015
INCR DECR SELECT
- CLOCK - MONTH
UP DOWN SELECT
SELECT

MONTH: 8
INCR DECR SELECT
- CLOCK - DAY
UP DOWN SELECT
SELECT


DOWN