V7.5.0.0 – published on February 03, 2023 103
Vehicle landing safety
Warning: Landing a drone on a moving vehicle is a technical gesture, which requires training and focus.
Landing is always one of the most sensitive parts of a flight and performing it in motion makes it even
more crucial.
Always monitor each stage of the Returning to vehicle and Landing sequences carefully, even if select the
Landing ending for Vehicle missions. Always be ready to reclaim control of the drone at any stage of the
flight.
Vehicle missions consume more battery power. Increase the safety margins on your battery readings. If
you normally land with 20% battery power remaining, aim for 30 %.
The landing sequence of a Vehicle mission implies the activation of a landing zone search by ANAFI Ai. This
search can:
• occur automatically after an RTV, if you select the Landing ending from the Advanced RTH settings;
• occur by pilot action on the button when the drone is at a maximum distance of 30m from the
vehicle. The drone descends to 8m high before starting the search.
• If the vehicle is moving and the landing zone cannot be acquired after 8 seconds, the drone
automatically lands at a reduced speed. FreeFlight 7 prompts you to adjust the drone’s position.
• If the vehicle is stopped, the drone continues to descend while searching for the landing zone. If the
landing zone cannot be acquired, FreeFlight 7 prompts you to adjust the drone’s position and the
drone lands while tracking the vehicle position.
When the drone acquires the landing zone, the top center of the screen displays a Precise landing
notification.
To Next Page
Loading...
