V7.5.0.0 – published on February 03, 2023 106
When the waypoint is set on the map, you can tap the live image window to display it full screen. The
waypoint will be visible on its center.
You can then tap on the live image or drag and drop the waypoint to set its new position. The new
waypoint location is set on a cylinder with, as a center the drone, and as a radius the distance between the
drone and the last waypoint.
Touch & Fly: POI
The Point of Interest (POI) Touch & Fly mode enables you to fly ANAFI Ai around any point on the map,
keeping this particular point at the center of the map. Tap Touch & Fly from the PILOTING MODE box. The
map of your surroundings opens full screen. The live image captured by ANAFI Ai is minimized in the top
right-hand corner of your screen.
Long press a point on the map to create a POI for ANAFI Ai. This point is marked as a green square with a
white border. Use the slider on the right of the screen to set the POI ALTITUDE.
To Next Page
Loading...
