Parrot ASTEROID User Manual

11Getting started
Note: Depending on the model of your phone, you may have to authorize the connection to the
Parrot ASTEROID to allow the automatic connection.Refer to your phone user guide for more
information.
Defining a phone as preferred phone
The phone which you will define as Preferred is the one whose connection with the Parrot ASTEROID
will take priority. This option may be useful if several phones paired with the Parrot ASTEROID are
simultaneously in the vehicle. To define a phone as preferred :
1. Select Settings > Telephony > Paired devices.
2. Select the phone you want to define as Preferred.
3. Check the Preferred phone option.
Disconnecting a phone
1. Select Settings > Telephony > Paired devices.
2. Select the phone you want to disconnect from the Parrot ASTEROID.
3. Select Disconnect.
Deleting a phone from the paired devices list
1. Select Settings > Telephony > Paired devices.
2. Select the phone you want to delete.
3. Select Delete.
Managing the "Memory full" problem
You can pair up to 10 devices with the Parrot ASTEROID. If you attempt to pair an 11th phone,
you will get the « Memory full » message. You must then delete a phone from the paired devices
list. To do so:
1. Select Settings > Telephony > Paired devices.
2. Select the phone then select Delete.
Note: The problem of full memory may also be related to an installation problem: inversion of
ignition 12V and permanent 12V or absence of after-contact 12V.

Parrot ASTEROID Specifications

General

Equalizer	Yes
Product color	Black
Phonebook capacity	8000 entries
USB version	2.0
Bluetooth version	2.1+EDR
USB ports quantity	1
Display type	TFT
Display diagonal	3.2 \