20
Music
Playing a music file
1. Connect your USB storage device to the Parrot ASTEROID using the USB cable or the USB
connectors on the back of the car stereo
2. Press the SOURCE button until the USB source is selected.
3. If the tags of your audio files are correctly defined, select one of the classification features
(artist, album, songs, genres, playlist) and press the jog wheel. If the tags of your audio files
are not defined, select Directories or Flat directories.
Note : To browse more easily through the content of your USB device, press the button and
select the first letter of the artist / album / track you want to hear.
Note : Several minutes of loading may be necessary when connecting your audio peripheral (USB /
SD / iPod) to the Parrot ASTEROID for the first time, particularly if you are using audio peripheral
with a large capacity or containing many audio files. This loading time will allow your audio files to
be accessible via voice recognition.
You can use the following SD cards with the Parrot ASTEROID :
- SD, micro SD (with adapter), mini SD (with adapter)
- SDHC (class 2, 4, 6), mini SDHC (with adapter), micro SDHC (with adapter)
There is no restriction in terms of capacity of SD cards.
Only MP3 (Mpeg 1 Layer3), AAC or WMA formats are supported.
Playing a music file
1. Remove the Parrot ASTEROID faceplate.
2. Insert the SD card into the appropriate slot with the contact surface facing down.
3. Reattach the faceplate.
4. Press the SOURCE button until the SD source is selected.
5. If the tags of your audio files are correctly defined, select one of the classification features
(artist, album, songs, genres, playlist) and press the jog wheel. If the tags of your audio files
are not defined, select Directories or Flat directories.
Note : To browse more easily through the content of your SD card, press the button and
select the first letter of the artist / album / track you want to hear.
To Next Page
Loading...
Need help?
General
