Parrot ASTEROID User Manual

21Music
Analogue audio player
Compatibility
Use a Jack / Jack cable to connect an analogue audio player (ex CD player) to the Parrot ASTEROID.
Playing a music file
1. Connect the audio player using the Jack connector.
2. Press the SOURCE button until the Line in source is selected.
3. Start playing a song on your audio player.
Deactivating the Line in source
Every audio player is only displayed in the source menu only if it is connected to the Parrot
ASTEROID except the Line in source. To hide the Line in source and avoid a useless step while
selecting your audio source:
1. Select Settings > Audio.
2. Check the Activate Line in option.
Mute / unmute
Press the button to mute / unmute the Parrot ASTEROID.
Audio player connected via Bluetooth
Note : The Parrot ASTEROID allows you to use the telephone and audio streaming functions from
2 different phones without having to disconnect one of them.
Compatibility
You can use the Parrot ASTEROID to listen to songs stored on your mobile phone or Bluetooth
audio device. To do so, your phone / audio device must support the Bluetooth A2DP profile
(Advanced Audio Distribution Profile). To make sure the phone connected to the Parrot
ASTEROID supports the A2DP profile:
1. Select Settings > Telephony > Paired devices.
2. Select your phone then select Supported Bluetooth profiles.
> If Bluetooth audio reception is displayed, then you can use this phone with the Parrot
ASTEROID via Bluetooth.
Playing a music file

Parrot ASTEROID Specifications

General

Equalizer	Yes
Product color	Black
Phonebook capacity	8000 entries
USB version	2.0
Bluetooth version	2.1+EDR
USB ports quantity	1
Display type	TFT
Display diagonal	3.2 \