Parrot ASTEROID User Manual

31Settings
Troubleshooting
Before you begin
Make sure the “Goodbye” message is displayed on the Parrot ASTEROID screen when you turn
the ignition off. Refer to the Checking the wiring section for more information.
Reset the Parrot ASTEROID. To do so, remove the faceplate then use a paper clip to press the
Reset button. Hold down the Reset button for 3 seconds.
Make sure you have the latest software update on your Parrot ASTEROID. To do so, select
Settings > About > Version. Compare this number with the one on our website, Downloads
section.
Problems while using the phone function
Make sure your phone is compatible with the Parrot ASTEROID. To do so, refer to the
compatibility list of the Parrot ASTEROID.
If your phone is compatible with the Parrot ASTEROID and if you already have the latest
software update:
1. Erase the memory of the Parrot ASTEROID. To do so, select Settings > Advanced settings >
Factory settings.
2. On your telephone, erase the Parrot system from the list of Bluetooth peripherals (or reboot
your iPhone®).
3. Repeat the pairing procedure for the 2 devices.

Parrot ASTEROID Specifications

General

Equalizer	Yes
Product color	Black
Phonebook capacity	8000 entries
USB version	2.0
Bluetooth version	2.1+EDR
USB ports quantity	1
Display type	TFT
Display diagonal	3.2 \