Parrot DS1120 User Manual

Optimal conditions
• 1 = 2 = 3
• 4 > 40 cm
• 5 ~ 60°
1 2
3
4
5
10
Use cases
- Streaming Audio from a PC (A2DP prole). Refer to the
“Using the Parrot Bluetooth USB Dongle” section for more
information.
- Streaming audio from any kind of audio player with the Jack
socket (Jack-Jack audio cable supplied)
- Streaming Audio from a mobile phone / PDA / Smartphone
(A2DP prole)
Note : if you waNt to fiNd out which devices are equipped with
the a2dp techNology, visit the support sectioN oN our website
at www.parrot.com
Setting up the Parrot DS1120
1. Selecting a place for the Parrot DS1120
The Parrot DS1120 is designed to be placed on a desk,
a table or a stable shelf. To get the best possible sound
performances, we advise you to respect the following
recommendations:
• Make sure that you correctly installed the speakers at
their respective positions (the “Right” and “Left” labels are
located on the back of the speakers).
• Install your speakers at the same distance
from the listening point.
• Make sure there are no obstacles between the speakers
and you. Avoid corners if possible.
• Turn the speakers towards the listening point by establishing
a 60 degree angle (refer to the diagram) as most
of the stereo recordings are realized for this conguration.
• Install your speakers at ear level: by doing so,
the frequency response will be optimal.
• To get the best possible reproduction of the bass frequencies,
make sure there is a minimal distance of 40 cm between the
back and lateral walls and the speaker. Bass frequencies
will get louder if you place your speakers closer to the walls.

Parrot DS1120 Specifications

Speakers

output power	2 x 15 W (RMS)
frequency range	100Hz – 18 kHz
dimensions	153 x 144 x 131 mm
weight	2 x 950g

Memory

flash memory	4MB
ram	8MB

Power Supply

ac voltage	100-240V ~ 50/60Hz
dc voltage	12V
dc current	2A