Parrot DS3120 User Manual

11
Playing music
files stored on
an SD card
1.
Insert the SD card into the appropriate slot.
> The content of the SD card is automatically displayed.
Depending on the content of your peripheral, the
display of its content can take up to 30 seconds.
> To reach later the peripheral content from the main menu, select
USB/SD, then select the peripheral you want to browse.
► Refer to the technical specifications for further
information about the compatible SD cards.
2.
To visualize the content of your SD card:
• If the tags of your music files are correctly defined, select one
of the following options: Playlist, Artist, Album, Songs and
Genres.
• If the tags of your music files are not defined, select Browse by
directory, then:
- Use the arrows to browse the content of your audio
player.
- Press to enter a music folder or to start playing a music
file.
- Press to reach the previous folder (or select « Root »).
Using an audio
player with the
Jack cable
1. Use the 3.5 mm Jack/Jack cable to connect your audio player
to the Parrot DS3120.
2.
From the main menu, select
Line in and press .

Parrot DS3120 Specifications

Power

power supply input	100-220 V~, 50-60 Hz
power supply output	12Vdc, 2A

Bluetooth

bluetooth version	2.0 + EDR
bluetooth pin code	0000
supported bluetooth profiles	A2DP, AVRCP, FTP, OPP, SPP

Weight and Dimensions

dimensions	150 x 300 x 100 mm
weight	1.5 kg