To use the Parrot DS3120 with your cell phone or audio player (device on which your audio
files are stored), you must connect both devices.
Moreover if you are using your cell phone / audio player with the Parrot DS3120 for the first
time, you must pair both devices before connecting them. The pairing operation is only
necessary once, except if you reset the device.
Pairing an audio
player with the
Parrot DS3120
1. From your Bluetooth device, launch a Bluetooth peripherals
search and select « Parrot DS3120 ».
► Refer to your device’s user guide for further information
2.
Enter « 0000 » on your device when you are prompted to.
> A pop-up is displayed to confirm the pairing.
3.
Press to accept the pairing.
> Pairing successful » is displayed on the Parrot DS3120.
> You can now connect both devices then use the telephony or
audio streaming functions depending on the type of device you
just paired.
You can change the Bluetooth friendly name of the
Parrot DS3120.
►
Refer to the
« changing the name of the Parrot
DS3120 » section for further information.
Connecting an
audio player to the
Parrot DS3120
Once you have paired both devices :
1.
From the main menu, select Bluetooth.
> The list of devices paired with the Parrot DS3120 is
displayed.
2.
Select the device you want to use and press .
> You may have to accept the connection with the Parrot
DS3120 on your device.
The Parrot DS3120 can be paired to 10 audio players. Pairing an11th
device will cancel the pairing of the device which has not been connected
to the Parrot DS3120 for the longest period.
To Next Page
Loading...
Need help?
Power
Bluetooth
Weight and Dimensions
