20
Setting an alarm
The Parrot DS3120 allows you to set a simple and a recurring alarm.
A reminder pops up if the alarm triggers while you are
already using the Parrot DS3120.
1.
From the main menu, select Alarm / Clock > Alarms >
Alarme or Recurring alarm depending on the alarm you want
to activate.
2.
Select the Enabled option to activate the alarm.
3.
Select Time and press to set the triggering time of the
alarm.
4. Select the type of melody among the following possibilities:
•
For a ringtone, select Buzzer.
• For an audio file stored on an SD card or on an USB
peripheral (already connected), select File and select
the audio file or the Random File option.
If the audio files are stored on an MP3 player, the audio
player must be turned on to enable the playback of the
selected audio file as alarm.
If the peripheral is not available playback is replaced by
a ringtone of the Parrot DS3120.
• For the radio, select FM Radio.
The FM station used as alarm is the latest station
emitted.
5.
Select the Volume option to adjust the volume of the alarm
when it triggers.
6. If you have chosen a recurring alarm, select the checkbox of
the day or days of the week you wish to repeat the alarm.
The idle mode and the standby mode do not prevent
the alarm triggering.
7. When the alarm triggers :
• press to shut it.
• press to interrupt it for 5 minutes.
To Next Page
Loading...
Need help?
Power
Bluetooth
Weight and Dimensions
