19
Using the clock and alarm functions
Setting up time
and date
Time and date will be automatically displayed if the location of the Parrot
DS3120 enables the reception of a RDS signal. To do so, make sure the
Use RDS Time option is activated.
The reception takes 2 to 5 minutes, depending on the signal intensity.
To ensure the best quality of reception possible, make
sure the antenna is correctly unrolled from the batteries
compartment.
►
Refer to the «Unrolling the antenna» section for
further information.
If the location of the Parrot DS3120 does not allow this automatic
synchronization, a pop-up is displayed to ask you if you want to set up
the time manually.
If you want to set up the time manually, select Alarm / Clock > Clock
from the main menu :
- Use the arrows to adjust time and date.
- Press
to confirm.
- Press to return to the previous digit.
Check or uncheck the 24 hours option to visualize the time at the 24h
format or AM/PM.
From the main menu, select Settings > Display > Time in title to
visualize the time on the screen of the Parrot DS3120.
To Next Page
Loading...
Need help?
Power
Bluetooth
Weight and Dimensions
