24 25
Device Properties
FUNCTIONAL_MODE
IMAGE_SIZE
COMPRESSION_SETTING
WHITE_BALANCE
F_NUMBER
FOCAL_LENGTH
FOCUS_DISTANCE
FOCUS_MODE
EXPOSURE_METERING_MODE
EXPOSURE_PROGRAM_MODE
DATETIME
STILL_CAPTURE_MODE
TIMELAPSE_NUMBER
TIMELAPSE_INTERVAL
FOCUS_METERING_MODE
Custom
Request
GET_SUNSHINE_VALUES
GET_TEMPERATURE_VALUES
GET_ANGLE_VALUES
GET_GPS_VALUES
GET_GYROSCOPE_VALUES
GET_ACCELEROMETER_VALUES
GET_MAGNETOMETER_VALUES
GET_IMU_VALUES
GET_STATUS_MASK
START_MAGNETO_CALIB
STOP_MAGNETO_CALIB
MAGNETO_CALIB_STATUS
SEND_FIRMWARE_UPDATE
Event
STATUS
MAGNETO_CALIBRATION_STATUS
Properties
PHOTO_SENSORS_ENABLE_MASK
PHOTO_SENSORS_KEEP_ON
MULTISPECTRAL_IMAGE_SIZE
MAIN_BIT_DEPTH
MULTISPECTRAL_BIT_DEPTH
HEATING_ENABLE
WIFI_STATUS
WIFI_SSID
Refer to the documentation for your PTP or PTP/IP software (gphoto2 or
ptpcam for example).
For more information on the Sequoia PTP and PTP/IP protocols, see the
Integration Guide available in the Sequoia set up interface help section
and on www.parrot.com/uk/support.
TECHNICAL SPECIFICATIONS
Sensor resolution
The ground resolution of the RGB sensor and the multispectral sensor
depends on the height of the flight. Refer to the table below to determine
the flight height depending on the required resolution.
Ground resolution (cm/px)
Height (m) Monochrome RGB
30 3.7 0.8
40 4.9 1.1
50 6.2 1.4
60 7.4 1.6
70 8.6 1.9
80 9.9 2.2
90 11.1 2.4
100 12.4 2.7
110 13.6 2.9
120 14.8 3.3
130 16.1 3.5
140 17.3 3.7
150 18.6 4.1
To Next Page
Loading...