28 29
For the best coverage rate during flights at a certain altitude you must
allow for a distance between shots. To find out the minimum time to be
respected depending on the flight height refer to the following chart and
diagram.
Distance between shots (m)
Height (m) 0.7 0.75 0.8 0.85
30 8.4 7.0 5.6 4.2
40 11.2 9.3 7.5 5.6
50 14.0 11.7 9.3 7.0
60 16.8 14.0 11.2 8.4
70 19.6 16.4 13.1 9.8
80 22.4 18.7 15.0 11.2
90 25.2 21.0 16.8 12.6
100 28.0 23.4 18.7 14.0
110 30.8 25.7 20.6 15.4
120 33.7 28.0 22.4 16.8
130 36.5 30.4 24.3 18.2
140 39.3 32.7 26.2 19.6
150 42.1 35.1 28.0 21.0
0
5
10
15
20
25
30
35
40
45
30 50 70 90 110 130 150
Distance between two flight lines (m)
Flight height (m)
Distance between shots
Overlap = 70%
Overlap = 75%
Overlap = 80%
Overlap = 85%
Distance between two flight lines
Refer to the diagram below to find out the distance between two flight
lines depending on the Sequoia flight height.
0
5
10
15
20
25
30
35
40
45
50
55
60
30 50 70 90 110 130 150
Distance between two flight lines (m)
Flight height (m)
Distance between two flight lines
Overlap = 70%
Overlap = 75%
Overlap = 80%
Overlap = 85%
Memory used per hectare
Refer to the diagram below to find out the memory required by Sequoia
for a given number of hectares.
0
500
1000
1500
2000
2500
3000
3500
4000
30 50 70 90 110 130 150
Flight height (m)
Memory used per hectare
Overlap = 70%
Overlap = 75%
Overlap = 80%
Overlap = 85%
Overlap = 70%
Overlap = 75%
Overlap = 80%
Overlap = 85%
Other technical specifications
• The frame rate is 1 fps (frame per second) maximum.
• Environmental operating conditions:
o Light range: 3000 to 120,000 lux. Use between
-10°C and +45°C.
• Power consumption: 5 to 12 W.