Parrot Zikmu - Page 10

10
Note: The WEP, WPA or WPA2 protection code is often written
under modems / routers or in the documentation provided with your
system. If you have changed this protection code, use the new code.
 Connect your PC to the Zikmu via Bluetooth. Refer to the
Using the Zikmu with a computer via Bluetooth section for
more information.
Installation
1. Launch the Parrot Audio Configuration Tool and select the
Wi-Fi tab.
2. Enter the name of your network in the SSID field.
3. Select the type of network key and enter the key.
4. Select the DHCP option and click on Apply.