Particle Measuring Systems LASAIR II 310 Operator's Manual


Controlling LASAIR II with Browser SoftwareControlling LASAIR II with Browser Software
LASAIR II Operator’s ManualLASAIR II Operator’s Manual
PagePage
7-117-11
Web Browser Web Browser Interface AdvantagesInterface Advantages
Using a computer-browser to access and control a LASAIR II has the followingUsing a computer-browser to access and control a LASAIR II has the following
advantages:advantages:
•• The LASAIR II can be accessed and controlled from a remote location.The LASAIR II can be accessed and controlled from a remote location.
•• A keyboard and mouse can be used for data entry and editing.A keyboard and mouse can be used for data entry and editing.
••
More data can be displayed on a larger screen.More data can be displayed on a larger screen.
•• Data can be copied from the LASAIR II directly to the computer’s hardData can be copied from the LASAIR II directly to the computer’s hard
drive, spreadsheet software, or database software.drive, spreadsheet software, or database software.
Web Browser Interface FunctionsWeb Browser Interface Functions
•• Display the particle and analog data from the LASAIR IIDisplay the particle and analog data from the LASAIR II
•• Configure the setup screens for samplingConfigure the setup screens for sampling
••
Start or stop samplingStart or stop sampling
•• Download, save, or delete sample dataDownload, save, or delete sample data
•• Detect alarmsDetect alarms
•• Print reportsPrint reports
•• Upload software revisions into flash memoryUpload software revisions into flash memory
Establishing Communications Through a Web BrowserEstablishing Communications Through a Web Browser
The same steps will be used to connect with a LASAIR II whether connectingThe same steps will be used to connect with a LASAIR II whether connecting
over an Ethernet network or directly from a PC over an Ethernet network or directly from a PC with a crossover cable.with a crossover cable.
NOTE:NOTE:
If someone else has control of the LASAIR II either directly or If someone else has control of the LASAIR II either directly or fromfrom
a FMS or PC, you will be unable to gain control of the LASAIR II. Leaving thea FMS or PC, you will be unable to gain control of the LASAIR II. Leaving the
LASAIR II edit screens active can also LASAIR II edit screens active can also interfere with a remote connection. Theinterfere with a remote connection. The
LASAIR II should always be left with the Main Display Screen open.LASAIR II should always be left with the Main Display Screen open.
To establish communication between a computer and the LASAIR II:To establish communication between a computer and the LASAIR II:
11 Start the LASAIR II and Start the LASAIR II and the computer.the computer.
22
If communicating directly to a PC, connect the If communicating directly to a PC, connect the LASAIR II to the PC’s EthernetLASAIR II to the PC’s Ethernet
connection with a crossover cable.connection with a crossover cable.
33
Open the browser software.Open the browser software.
44 Click on the IP address field to select the Click on the IP address field to select the entire address.entire address.
55 TType the LASAIR ype the LASAIR II’II’s IP address into s IP address into the into the the into the IP address field. You do notIP address field. You do not
need to type “http://” or the non-significant zeros in the IP address. The addressneed to type “http://” or the non-significant zeros in the IP address. The address
will be similar to the following example:will be similar to the following example:

Particle Measuring Systems LASAIR II 310 Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 310
Category	Measuring Instruments
Language	English