Particle Measuring Systems LASAIR II 310 Operator's Manual


Recipe Setup ScreenRecipe Setup Screen
PagePage
9-39-3
•• Flow: (Uni-directional/multi-directional) (FS-209E only)Flow: (Uni-directional/multi-directional) (FS-209E only)
•• Room Area (Except Room Area (Except AAverage)verage)
•• Number of Locations to SampleNumber of Locations to Sample
•• Volume per SampleVolume per Sample
•• Number of samples per locationNumber of samples per location
Information not Saved for a Information not Saved for a StatStatistics Recipeistics Recipe
•• Statistics User NameStatistics User Name
••
Sampling Setup Screen parameters. The number of samples is automaticallySampling Setup Screen parameters. The number of samples is automatically
set when statistics are enabled, except for average mode. In average mode,set when statistics are enabled, except for average mode. In average mode,
the current sample count is used if possible.the current sample count is used if possible.
•• Alarm settings. By default alarms are disabled during statistics.Alarm settings. By default alarms are disabled during statistics.
Recipe Setup ScreenRecipe Setup Screen
The recipe setup screen is located under the Sampling Setup Screen. From theThe recipe setup screen is located under the Sampling Setup Screen. From the
main main display display screen, screen, select select the the button button (1st (1st button). button). Then Then select select thethe
button (5th button).button (5th button).
The Recipe Setup Screen has the following two pages:The Recipe Setup Screen has the following two pages:
•• The “Setup” page allows creating, deleting and printing recipes. SamplingThe “Setup” page allows creating, deleting and printing recipes. Sampling
recipes are displayed in cyan, and recipes are displayed in cyan, and statistics recipes are shown in purple.statistics recipes are shown in purple.
•• The “Locations” page allows recipes to be attached to location names.The “Locations” page allows recipes to be attached to location names.
Recipe Setup Screen - Setup PageRecipe Setup Screen - Setup Page
Use this screen to Use this screen to create, delete, and print recipes. See create, delete, and print recipes. See FigureFigure 9-1, “Recipe9-1, “Recipe
Setup ScrSetup Screen, Setup Paeen, Setup Page,” on pagege,” on page 9-4.9-4.
Control buttons are as follows:Control buttons are as follows:
This button loads the highlighted recipe into the current settings for theThis button loads the highlighted recipe into the current settings for the
LASAIR II.LASAIR II.
This button saves the current sampling paThis button saves the current sampling parameters to a recipe. A promptrameters to a recipe. A prompt
for the recipe name is displayed for the recipe name is displayed when this button is activated. Thewhen this button is activated. The
default name is whatever recipe is cudefault name is whatever recipe is currently highlighted. If an existingrrently highlighted. If an existing
recipe name is used, the recipe is replaced with the nrecipe name is used, the recipe is replaced with the new parameters. A statisticsew parameters. A statistics
recipe may be re-written with a sampling recipe, and vice-versa. A copy recipe may be re-written with a sampling recipe, and vice-versa. A copy of thisof this
button is also on the Sampling Setup Screen for convenience in creating newbutton is also on the Sampling Setup Screen for convenience in creating new
sampling recipes.sampling recipes.

Particle Measuring Systems LASAIR II 310 Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 310
Category	Measuring Instruments
Language	English