Particle Measuring Systems LASAIR II 310 Operator's Manual


Printing a Statistics ReportPrinting a Statistics Report
LASAIR II Operator’s ManualLASAIR II Operator’s Manual
PagePage
8-238-23
Invalid Sample DataInvalid Sample Data
NOTE:NOTE:
Invalid data are not used in calculationsInvalid data are not used in calculations. However, they are. However, they are
saved with the other sample records.saved with the other sample records.
23a23a
II NNVVAALILI D D (( oror
VVAALILI DD))
The condition of the data: VALID, INVALID, or INCOMPLETE.The condition of the data: VALID, INVALID, or INCOMPLETE.
A sample is made A sample is made invalid by one of the following conditions:invalid by one of the following conditions:
•• The usThe user has maer has marked thrked the sampe sample invale invalid in lid in the Sampthe Samplele
Acknowledge modeAcknowledge mode
•• A pA pump ump errerror hor has as occoccurrurred.ed.
•• A laA laser ser errerror hor has oas occuccurrerred.d.
23b23b
20200000// 1111// 1616
The date of the last sampleThe date of the last sample
23c23c
1144:: 0077:: 0066
The time of the The time of the last sample (hour:minute:second)last sample (hour:minute:second)
24a24a
#002#002
The name or number of the area that was being sampled when anThe name or number of the area that was being sampled when an
error occurrederror occurred
24b24b
AAll arar mm:: PumPumpp
(or Laser)(or Laser)
The type of error detected by the LASAIR IIThe type of error detected by the LASAIR II

Particle Measuring Systems LASAIR II 310 Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 310
Category	Measuring Instruments
Language	English