Particle Measuring Systems LASAIR II 310 Operator's Manual


Page Page 8-10 8-10 LASAIR LASAIR II II Operator’s Operator’s ManualManual
Chapter 8: Statistics ModeChapter 8: Statistics Mode
+1, +2, +3...+1, +2, +3... Auto Increment. When this check box is filled, LASAIRAuto Increment. When this check box is filled, LASAIR
II automatically changes the location when sampling II automatically changes the location when sampling at one location isat one location is
complete. This option can be complete. This option can be changed while the statistics mode is enabled.changed while the statistics mode is enabled.
Sample AcknowledgeSample Acknowledge When this check box When this check box is filled, LASAIR II promptsis filled, LASAIR II prompts
for an acknowledgement after each sample. This option can be changed whilefor an acknowledgement after each sample. This option can be changed while
the statistics mode is enabled.the statistics mode is enabled.
ABC... or 1,2,3...ABC... or 1,2,3... SelectSelect
ABC...ABC...
oror
1,2,3...1,2,3...
ABC will select eitherABC will select either
location names or location numbers. This option cannot be changed oncelocation names or location numbers. This option cannot be changed once
statistics has been enabled.statistics has been enabled.
About Location Names or NumbersAbout Location Names or Numbers
During the statistical certification process, you will move the unit to differentDuring the statistical certification process, you will move the unit to different
locations for sampling. The LASAIR II allows you to choose locations for sampling. The LASAIR II allows you to choose one of the twoone of the two
following options for identifying those locations.following options for identifying those locations.
•• auto-incrementing names/numbersauto-incrementing names/numbers
•• manual user selection of the location name manual user selection of the location name (or number)(or number)
YYour choice of numbering our choice of numbering method will determine the settings you method will determine the settings you must make inmust make in
thethe StatistiStatistics cs Setup-SetupSetup-Setuppage.page.
Highly Recommended:Highly Recommended: If you pick bothIf you pick both 1,2,31,2,3andandAuto incrementAuto increment,,
LASAIR II automatically assigns a sequence of 3-digit numbers to each newLASAIR II automatically assigns a sequence of 3-digit numbers to each new
location you sample within this cleanroom.location you sample within this cleanroom.

Particle Measuring Systems LASAIR II 310 Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 310
Category	Measuring Instruments
Language	English