Partlow MIC 1400 - Page 30

MIC 1400 Manual Edition 1
30
DISPLAY AVAILABLE FACTORY
STEP DESCRIPTION CODE SETTINGS SETTING
31 Decimal dPoS 0, 1, 2, 3 1
Position (Linear Input Only)
32 Engineering Euu -1999 to 9999 1000
Units Upper
33 Engineering EuL -1999 to 9999 0
Units Lower
34 *Enable Pre EPtn 0=Disable 0
Tune 1=Enable
35 Enable Manual ESby 0=Disable 0
Control 1=Enable
36 **Setpoint Ramp ESPr 0=Disable 0
Rate Enable 1=Enable
37 Comm. Enable CCon 0=Disable 1
1=Enable
* Activates Pre-Tune on power-up when enabled.
** When enabled, allows user to change ramp rate without having to enter
Tune mode.