Partlow MIC 1400 - Page 29

MIC 1400 ManualEdition 1 29
DISPLAY AVAILABLE FACTORY
STEP DESCRIPTION CODE SETTINGS SETTING
18 Output 1 o1PL 0 to 100% 100
% Limit
19 Output 1 Ct1 .5, 1, 2, 4, 8, 16, 32, 32
Cycle Time 64, 128, 256, 512
secs
20 Output 2 Ct2 .5, 1, 2, 4, 8, 16, 32, 32
Cycle Time 64, 128, 256, 512
secs
21 Process High PHA1 ± Span Span Max.
Alarm 1
22 Process Low PLA1 ± Span Span Min.
Alarm 1
23 Band Alarm 1 bAL1 0 to Span 5
24 Deviation dAL1 ± Span 5
Alarm 1
25 Process High PHA2 ± Span Span Max.
Alarm 2
26 Process Low PLA2 ± Span Span Min.
Alarm 2
27 Band Alarm 2 bAL2 0 to Span 5
28 Deviation dAL2 ± Span 5
Alarm 2
29 Loop Alarm LAEn 0=Disable 0
Enable 1=Enable
30 Loop Alarm LAti 1 sec to 99 mins. 99 mins.
Time 59 secs. 59 secs.